Easy Things to Design and 3d Print Easy 3d Printable Designs

One of the struggles of owning a 3D printer is deciding what cool prints to make next. With so many 3D model sharing websites, there are endless 3D print ideas to try.

In this article, we'll give you our top picks for the coolest 3D printer projects and show you where you can find the models you need.

Top 3D Printing Projects and Ideas in 2022

Elastic Football

This two-player elastic football game uses rubber bands to make the player pieces flexible in order to manipulate the small ball across the printed field. The sides of the playing field have an abacus-style point counter for both players and a lever to control the goalie piece on the back.

• Designed by: Wilko_SLO
• Where to get: PrusaPrinters

Mechanical Wall Clock

Clocks are fairly complex and cool in general, but 3D printed clocks like this one by Hairald are especially interesting to look at. This design is fully printed and does not use any electronics or batteries.

The mechanism uses a wind-up method with a hand crank and a hanging weight to move the gears using the force of the falling weight. You can watch a video of this particular clock in action here.

• Designed by: Hairald
• Where to get: PrusaPrinters

Squid Game - Front Man Mask

Can't get enough of Netflix's Squid Game? Neither could the designer of this front man mask. Print this model for an interesting decor piece to hang on the wall or use it to finish off your best cosplay outfit.

• Designed by: r1nce
• Where to get: PrusaPrinters

Articulating Raspberry Pi Camera Mount

While the best 3D printers come with a built-in camera option for creating time lapse videos and remotely monitoring prints, you can also add this functionality to any 3D printer that does not natively have it.

This articulated camera mount uses a Raspberry Pi controller to bring a fully flexible camera option for remote viewing, time lapse recording, or taking stills of your prints as they are in progress.

• Designed by: Sneaks
• Where to get: PrusaPrinters

Original Simpsons TV

Keep a little ode to the Simpson's on your shelf or desk with this miniature recreation of the original TV set from the show.

This design uses a Raspberry Pi and other inexpensive components to create a working miniature television screen that plays videos on loop.

• Designed by: buba447
• Where to get: Thingiverse

Charger Cable Organizer

The only thing more annoying than an unorganized wad of chargers and cables is a tangled unorganized wad of chargers and cables. These printable organizers store your chargers when not in use, keeping them tidy and protected from other cords.

They work like small spools, letting you unwind the charger only as far as you need. When you're done using the cable, you just twist the lid to wind the cord back up.

• Designed by: DFV Tech
• Where to get: PrusaPrinters

Screw Measuring Tool

Nothing slows you down more than a container full of mixed-together mystery screws and bolts. This screw measure tool is easy to print and has all the most common bolt and screw sizes to help you quickly identify the size and type of errant bolts, screws, or nuts.

• Designed by: MattG
• Where to get: PrusaPrinters

Rugged Desktop Organizer

Keep your desk tidy and your office supplies close at hand with this multipurpose desktop organizer. It has built-in slots for your USB sticks, SD and micro SD cards, and compartments for your pens, scissors, and any other tools you use on the regular.

• Designed by: Byzantium3D
• Where to get: Cults

Giroid Vase

Both functional and beautiful, this giroid vase is a fast and easy print project that doesn't require any supports or serious post-processing work.

If you don't intend to use it with water (such as when using silk flowers), it's ready to use right off the build plate. However, if you plan to use it as a traditional vase, it is best to spray it with some sort of sealant to keep the water from leaking through the print layers.

• Designed by: Area3D
• Where to get: Thingiverse

Marble Maze

You'll need to move the zen garden on your office desk, because this printed marble maze is the clear cure for office boredom. Fully printable (aside from the marble, of course) and easy to assemble, this design uses snap-together ball and socket joints on the parts to avoid glue or other adhesives.

• Designed by: ericman314
• Where to get: PrusaPrinters

Cute Caravan Birdhouse

Camping enthusiasts rejoice: now the wildlife can also enjoy the charm of a vintage camper with these cute caravan birdhouses. You'll need to 3D print the two colors separately before gluing the 3D prints together for a cute two-toned effect. This build fits on most print bed sizes.

• Designed by: PA1
• Where to get: Cults

Drippy Bucket

Add a little pop art to your work or living space with the drippy bucket. Printed as three separate pieces, the handle and paint drips both snap onto the main bucket without glue or screws required. It's the perfect container for pens, dice, or even loose change.

• Designed by: davemoneysign
• Where to get: PrusaPrinters

Fractal Vise

Not only is this fractal vise model extremely cool-looking, it is also an incredibly useful tool once fully assembled.

This project requires quite a bit of hardware, including multiple sizes of bolts and screws, as well as lengths of both smooth and threaded rods. Assembling the vise is also quite time-consuming, but the designer thankfully has a video tutorial outlining the whole process.

• Designed by: TeachingTech
• Where to get: Thingiverse

Squeeze Fan

This hand-powered squeeze fan is as useful as it is fun. Using the handle pushes the inner gears and turns the propellers. This design is perfect for camping trips, emergency kits, and other scenarios where power or batteries might be hard to come by.

• Designed by: GeorgeZSL
• Where to get: Thingiverse

Face Shield

With the pandemic still in full swing, personal protection equipment is as important as ever. This basic face shield was designed by the Prusa research team and gained EU certification as a viable personal protection tool.

Whether you are still looking for protective methods from COVID-19 or work in an industry that requires face shields, this model is fast and easy to print.

• Designed by: Prusa Research
• Where to get: PrusaPrinters

Lithophane Moon Lamp

This project uses a lithophane model that maps the actual surface topography of the moon to make a realistic miniature rendering of it. This version adds tripod legs and a hole on the bottom for a light to make it a functional, beautiful lamp.

• Designed by: Frank Deschner
• Where to get: PrusaPrinters

Landy Mini

If you think this is a basic miniature car model, think again. Assembled with only a handful of screws, the Landy Mini has a fully functioning suspension system.

Though it's a bit time-consuming to print and assemble, the Landy Mini is a fun and well-designed project that would look great on a desk or shelf in your home or office.

• Designed by: 3D Sets
• Where to get: PrusaPrinters

Self-Watering Planter

Love plants but have a brown thumb? This self-watering planter slowly feeds in water from a reservoir as the soil dries. So even if you forget to water them for a few days (or weeks, let's be honest), they'll still get the care they need.

• Designed by: Mikolas Zuza
• Where to get: PrusaPrinters

Split-Flap Display

Based on the split-flap displays of the past, this model uses a handful of components and a wireless adapter to make a DIY digital split-flap display that connects to your network. You can program it to work as a clock, calendar, message board, or whatever else you can think of.

• Designed by: David Kingsman
• Where to get: PrusaPrinters

Cryptex

Inspired by the Da Vinci Code, this cryptex has a small compartment to hide things like candies, jewelry, or notes inside. You can program the cryptex to open for a specific series of letters, much like a combination lock.

While this is in no way a secure place to store anything valuable (it is printed from plastic, after all), it's a funny way to keep coworkers out of your sweets, to give someone a gift, or to play a game with your kids.

Recommended:

The 8 Best 3D Printers for Kids

• Designed by: Cees
• Where to get: PrusaPrinters

Bag Clip

A stark improvement on the chip clips of old, this clip prints in place with minimal supports. It uses a three-hinge system, so it stays on the bag more securely without slipping off. If you want something that will be quick and easy to print, this is a great option.

• Designed by: Andrei
• Where to get: PrusaPrinters

Rotating Rings Toy

The mini gyroscope has remained one of the most popular fidget toys in the 3D printing community for several years, most likely due to its unique design. It prints in place and can be used right off the build plate.

• Designed by: Marvin
• Where to get: PrusaPrinters

Mantis Clamp

The mantis clamp is an interesting take on a vise design, using a hand crank and gears to tighten and loosen the clamp. As illustrated in the photo below, that makes it a handy device for holding up small things like electronics components, painting miniatures, and so on.

• Designed by: zuberio
• Where to get: PrusaPrinters

Deadpool Bust

Avocado Seed Floater

Sprouting avocado seeds is a little more delicate than just dropping them in some potting soil and hoping for the best. They need to be partially submerged in water for several days for the pits to start growing a sprout. Luckily, this is easy to control with this 3D printed seed floater.

• Designed by: Mikolas Zuza
• Where to get: PrusaPrinters

Drill Depth Stop

When you need a specific stopping point for your drill bit, these printable drill depth stops are an easy and economical way to keep your drill from going too deeply into your material.

The model offers a variety of sizes that correspond with popular drill bit dimensions, so you should be able to find one that suits your needs regardless of which drill bit size you use.

• Designed by: Highrise Workshop
• Where to get: PrusaPrinters

Sunflower Clock

Unlike the other clock we shared in this list, this beautiful design is a fully functional wall clock with added electronic components. This clock has a lot of different pieces to print, thanks to the thin bands of PETG used for the petals. It takes some time to assemble, but the final look is worth the effort.

• Designed by: Romano Rugeri
• Where to get: PrusaPrinters

Cute Skull Lamp

We'd say these skull lamps are a perfect addition to your Halloween decor, but they're so adorable that you'll probably want to keep them up year-round. They are easy to print and only take an inexpensive strand of LED lights and a few batteries to assemble them.

• Designed by: rayjizza
• Where to get: PrusaPrinters

Ancient Guardian from Zelda BOTW

Any Nintendo gamers reading this will automatically know what these deceptively innocent-looking articulated robots are, and probably started sweating and hearing dramatic piano music the moment they spotted them.

But if you haven't been totally traumatized yet by the ancient guardians during your BOTW playthrough, these models are a must-print item. The legs are fully articulated and print in place, so you can just pop the entire figure off the build plate and immediately start your campaign to bring down Hyrule.

• Designed by: Crafty Sven
• Where to get: PrusaPrinters

Ornamental Bulbasaur

If you haven't gotten enough Bulbasaur from Bulbasaur planters, low-poly figurines, or Pokemon chess sets, you're in luck. This ornamental Bulbasaur model is one in a set of three decorative Pokemon models that you can print for free.

Since the model uses a lot of Victorian filigree elements, it looks fantastic with a metallic finish, especially with a patina. They acquired that look in the photo below using paint, but metal-filled filaments or cold casting the model in resin are two other possibilities for making this model look its best.

• Designed by: Psdwizzard
• Where to get: Thingiverse

3D Printable Drone

For a functional mini-drone, this design works well and is a lot of fun to use. Designed around a battery case for a single lithium battery, it is not going to be very powerful. However, it does work and it is a good beginner project for those wanting to learn how to 3D print and build more capable drones.

• Designed by: David Cledon
• Where to get: Thingiverse

Back Loaded Horn Speaker

This little printed speaker transforms into a powerful Bluetooth speaker with a little assembly and about $20 in components. Even better, the designer includes a wiring diagram and full assembly instructions along with the free STL, so even if you are new to this type of project, you can easily follow along.

• Designed by: guppyk
• Where to get: Thingiverse

Among Us Crew/Body/Ghost/Imposter

This five-piece set of Among Us models is a fun project for fans of the game. With all of the character types in the game available, you can vary the colors of each model to account for any possible in-game combination.

• Designed by: WalRit
• Where to get: Thingiverse

Print-in-Place Bearings

If you need bearings for one of your projects or you just want to give your printer a nice torture test to check its calibration, these print-in-place bearings are the answer. Designed in five common sizes, these models should have all the options you need for most projects.

• Designed by: guppyk
• Where to get: Thingiverse

Helmet Hanger

Both functional and decorative, this 3D printing project is the perfect solution for storing your helmet while also showing it off. The model is easy to print and allows for printing the sphere whole with supports or in two pieces without supports (to glue together after).

• Designed by: Sergi Lorenzo
• Where to get: Thingiverse

Tensegrity Table

When regular furniture gets too boring, choose some that appears to defy physics instead. This small table ties the bottom and top parts together with string, and the tension keeps the table parts upright. While the designer used blue string, a clear string is ideal because it's harder to see and makes the table really look like it's floating.

• Designed by: Austin Steingrube
• Where to get: Thingiverse

Hydroponic Self-Watering Seeds Starter

Another model for the gardening-challenged, these cute self-watering planters will keep your plants watered and nourished even if you don't. The planter comes in five different poses, with some sitting flat and others dangling their legs over a ledge, you can get really creative in staging your planter people on your desk, table, or shelf.

• Designed by: Studio Aditivo
• Where to get: PrusaPrinter

Print-in-Place Briefcase

Need a place to store your miniature work documents? What about your doll-sized stacks of money? This print-in-place briefcase does exactly what it says: it prints a miniature briefcase in one piece with fully functioning hinges and latches straight off the build plate.

This model (and other print-in-place projects) are a good way to test your printer's calibration and to see where it's having issues.

• Designed by: Dehapro
• Where to get: Cults

Bone Fingers

These articulated bone fingers bend with your fingers, making their movements look incredibly realistic. The project requires quite a bit of gluing and assembly after printing, but they are a stunning addition to cosplay outfits and Halloween costumes.

• Designed by: Littletup
• Where to get: Cults

Lazy Dogs

Yet another print-in-place project on the list. These adorable canines have articulated hinges in their body that gives them a wider range of flexibility. While they are mainly for decorative (or playful) purposes, these little dogs are quite popular with kids.

• Designed by: Mcgybeer
• Where to get: Cults

Hexagonal LED Panels

DIY printed light fixtures are one of the easiest ways to customize your decor, and these hexagonal LED panels are one of the best options we've seen.

Each hexagon light is printed and assembled separately before being fit together, which leaves plenty of room for creativity. Each light panel could have a different LED color, or work through a controller to loop through certain behaviors like blinking, twinkling, or transitioning through the RGB spectrum.

• Designed by: Jim Misel
• Where to get: Thingiverse

Mechanical Quick Grab/Release Phone Stand

This phone stand tightens around the phone when it's placed in the cradle and loosens when the phone is lifted off. It also rotates the phone up, down, and side to side while it is in the holder for optimal viewing at any angle.

• Designed by: Arron Mollet
• Where to get: Thingiverse

Slim Credit Card Wallet

When you want the bare essentials to keep your pockets from being weighed down, a card wallet is an essential accessory. This particular one is fully printed and comes with the added bonus of an ejector button to help you easily remove your cards when you need them.

• Designed by: Aljaz Titoric
• Where to get: Thingiverse

Measuring Cube

A modern take on the old concept of measuring cups, these cubes are a fun way to incorporate the different measurement sizes into one piece. However, we don't recommend using them for liquids in the kitchen since the small gaps between layers in 3D prints are not watertight.

• Designed by: Matt Stengler
• Where to get: Thingiverse

Thor Hammer

One of the more iconic Marvel props in the 3D printing community, Thor's hammer is easy to print and looks great on display. While it has a lot of fine details that would be best captured with a resin 3D printer, it will be challenging to print it at full scale on most consumer resin printers.

• Designed by: Rob Pauza
• Where to get: MyMiniFactory

CNC Machine

One of the best things about having a 3D printer is the ability to use it to produce additional printers or machines. This CNC machine is a perfect example of that. It uses 3D printed joints to assemble the rails, motors, and carving tool into a fully functional CNC.

• Designed by: Creative Think
• Where to get: Thingiverse

Raspberry Pi 4 Case

In case you missed it, this list is full of projects and ideas that use Raspberry Pi boards as the controller. Being small, cheap, and surprisingly flexible in its capabilities, the Pi lends itself extremely well to 3D printing.

With that in mind, it's no surprise that you can find dozens of models for Raspberry Pi cases on most of the project sharing websites. This one has one of the more attractive and functional designs available.

• Designed by: Carter
• Where to get: PrusaPrinters

Prusa Enclosure

Enclosures are often a necessity for printing ABS and other high-temperature filaments successfully, but DIY and budget printers rarely have them incorporated into their design. Fully enclosed 3D printers do exist, but they come at a price. Thankfully, enclosures are not overly difficult to make yourself, especially when upcycling existing furniture like this build.

This project gives you all the pieces needed to turn an IKEA Lack table into a functional 3D printing enclosure and filament station. While it is specifically designed for Prusa 3D printers, any printer that fits on a Lack table should work with this project.

Recommended:

9 Amazing DIY 3D Printer Enclosure Ideas

• Designed by: Ondřej Stříteský
• Where to get: PrusaPrinters

Fidget Infinity Cube

While fidget toys are always a popular category for 3D printing, these fidget cubes are especially interesting. Using a hinge design, you can fold and unfold the cubes in multiple directions.

This model prints flat and requires no assembly after printing. Since the hinges print in place, this project may take some experimentation with printer settings and calibration before it is printed successfully. The designer includes a test print with the model files so you can quickly try out different print settings without printing the full model.

• Designed by: Austin Vojta
• Where to get: PrusaPrinters

Addams Family Thing

Collapsible Basket

Our final pick for print-in-place designs, the collapsible basket is fun to print, cool to use, and easy to put in storage when you don't need it.

• Designed by: 3D Printing World
• Where to get: PrusaPrinters

Conclusion

Those were 51 of the coolest free 3D printing models! Did you like our picks? Have you printed any of these models before? Let us know in the comment section down below!

youngdephateras.blogspot.com

Source: https://clevercreations.org/cool-3d-printing-projects-things-3d-print-ideas/

Share this post